TS480 and transverter

Author Post

Paul, GW8IZR

Mon Mar 01 2010, 12:59PM
TS480 and transverter
I'm curious to hear from anyone who has successfully used the TS480 to drive a transverter.
In particular; if the radio is set for transverter operation on the antenna 1 connector and you then select antenna 2 do you have full power available on that port?
Can you setup so that enabling split operation allows either tx/rx on the transverter and rx/tx on the second antenna port.
Scenarios for wanting this are such as x-band from 50MHz to 70MHz (28MHz tvrt IF)
TIA
Back to top